AIRTEC Intercooler Upgrade for Audi RS3 (8P) Includes Slam Bar

Designed to fit all models, this free-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Kit includes an INTERCOOLER and MODIFIED SLAM BAR. This Intercooler will not fit the car with a standard slam bar. 

Featuring a huge 120mm core design together with high-flow, cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper and can be used with the original hoses.

As with all AIRTEC products, the intercooler was tested back-to-back on the dyno aginist the OEM item. This showed a huge reduction in air charge temperatures over standard, as seen below:

Rolling Road test results - Carried out at AmD Tuning on 11/04/2017

Standard Intercooler:

Run 1 - Into intercooler: 117 degrees - Out of intercooler: 69 degrees

Run 2 - Into intercooler: 117 degrees - Out of intercooler: 68 degrees

Run 3 - Into intercooler: 119 degrees - Out of intercooler: 78 degrees

AIRTEC Intercooler:

Run 1 - Into intercooler: 116 degrees - Out of intercooler: 36 degrees

Run 2 - Into intercooler: 117 degrees - Out of intercooler: 36 degrees

Run 3 - Into intercooler: 118 degrees - Out of intercooler: 37 degrees

The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 3-4 hours to complete.

The intercooler is available in a choice of either Natural Silver or Pro-Series Black finishes, with or without the AIRTEC logo.

Features:

• Designed and manufactered in the UK by AIRTEC
• AIRTEC logo'd cast end tanks for improved airflow and unbeatable strength
• Proven reduction in charge temps
• 3-year unlimited mileage warranty
• Available in either Natural Silver or Pro-Series Black finishes
• AIRTEC logo available at no extra charge
• Unbeatable value for money!

Approximate Dimensions:

Stardard:

Width: 535mm
Height 160mm
Depth: 80mm

AIRTEC:

Width: 540mm
Height: 215mm
Depth: 120mm

Intercooler Volume Capacity (The amount of charged air that the intercooler can hold)

Standard: 3.9-litres
AIRTEC: 6.1-litres

AIRTEC part no:  ATINTVAG19

Now Available From Roose Motorsport

New developments in antifreeze technology has meant that certain cars now being built using Organic Acid Technology (OAT) or Hybrid Organic Acid Technology (HOAT) Formulations. These new types of antifreeze are designed to have an extended service life of 5 years or 150000 miles.

These new grades of OAT have an anti-corrosion component in them which can be harmful to Silicone and rubber components. Due to this Roose Motorsport have introduced a new OAT liner which we apply to all our coolant hoses to comply with Euro 6 regulations.